Titanium AAA Flashlight by Maratac ™ REV 5

New 2021 Limited Overrun Less Than 250 Pieces!

The Maratac™ AAA Flashlight was so popular, we had it made in 6AL4V grade Grade 5 Titanium. The same great light, but now available in God's Metal = Titanium.

We literally had over 60k requests for Titanium AAA and the
wait is over. This is our first small production run.

45% lighter than steel, highly corrosion resistant & stronger than Stainless Steel

Specifications:

• Executive Series
• Glow in the dark Diffuser ( New for Rev 5 )
• Glow in the Dark front o-ring around reflector ( New for Rev 4 )
• Each light is hand finished.
• Length: 2.6" ( Smaller than Rev 1 )
• Diameter: .5"
• Weight with battery is 27.8 grams ( 16 grams without battery )
• LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter REV 4 )
• The New Orange Peel Reflector is polished aluminum alloy.
• The lens has been treated with an AR (anti-reflective) coating.
• Its proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides
• Now with 3 levels of brightness ( Med / Low / High ).
• Comes with clip & o-rings
• Machined from solid 6AL4V Titanium Grade 5
• Clip installed from factory to preserve finish
• New Stronger Clip

Using a single Duracell AAA battery we got the following results:

• Low mode, 5 lumens output for up to 65 hours
• Medium mode, 65 lumens output for up to 10 hours
• High mode, 180 lumens output for up to 75 minutes
• ( Rev 1 model was 80 Lumens and 48 minutes) ( Rev 2 model was 115 Lumens and 60 minutes)

We do not recommend the use of 10440 rechargeable batteries with this flashlight. It is designed to use a off the shelf alkaline, lithium, NiMH or Nicad AAA batteries. We do not recommend use of higher voltage batteries. Any attempt to modify these lights will void the warranty. We know when you try to remove the pill