High performance Nichia 219B 4500K R9080 high CRI LED
Gen 2 Upgraded Integrated Clip
+ Glow O-ring
Out First Programmable Push Button Flashlight
Includes 10440 Battery + Smart Multi Charger
Input DC 5V 2A+
Charging Output for 10440 Battery 4.2V @ 1A Max
Note only charge at .5A-1A for 10440 Cells to safely prolong the battery life upto 500+ cycles
We have received hundreds of emails asking for a light that uses a 10440 cell battery. We now have the ReyLight Brass AAA/10440 light which works with both cell variants.
Why use a 10440 Lithium cell? Higher voltage = Much brighter & also rechargeable
- Using single AAA battery, max 125 lumens, or 10440 Li-ion battery, max 285 lumens.
- Size: 89mm length (including the switch button) diameter: 15mm
- Weight: 52 grams
- Brass Billet
- 4 modes of brightness & fully programable to with the instructions below
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Warning: Don't use this cell in any another AAA or Maratac flashlight that you
own as it will void your warranty, and destroy the light.
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH. You MUST read the safety warnings and resources before purchasing, using, and/or handling batteries.
Beautiful little light... excellent build quality and a beautiful beam from the terrific Nichia emitter. Super bright with the included lithium cell, though convenient that it can also run on a standard AAA battery in a pinch. As always, super fast shipping from the great folks at CountyComm.
My previous EDC was the Brass Peak Design AAA with Dark Sucks Ti Pocket clip. I absolutely love this light. I’ve carried it for years all over the US and Hawaii. When I saw this light I ordered it right away. My main concern was the pocket clip. I have three other Maratac Copper lights, the AAA TPF, AAA and AA Ver1., with the clip on pocket clip. I’ve only had a pocket clip pop off once but it does make one cautious about losing a light. I figured I’d just move over my DS Ti clip to this new light. To my surprise this new light didn’t come with the originally pictured clip on clip. It came with a body mounted SS deep carry clip. Win. I tried to swap for the DS clip but the body dia. are different so that was a no go, no biggie the SS is very strong.
The light is well machined, nice weight and very nice light color rendering. The tail button is slotted for a tritium vial 🧪. Win. The button action becomes a little sticky, hopefully smooths with use. This has earned its spot in my pocket. I love this little light. The only improvement would be a deep carry Ti pocket clip, just sayin ; ). Awesome light.