Limit 2 Per Customer!
High performance Nichia 219B 4500K R9080 high CRI LED
285 Lumens Max!
Gen 2 Upgraded Integrated Clip + Glow O-ring
Out First Programmable Push Button Flashlight
Includes 10440 Battery ( Charger not included )
We have received hundreds of emails asking for a light that uses a 10440 cell battery. We now have the Titanium ReyLight AAA/10440 light which works with both cell variants.
Why use a 10440 Lithium cell? Higher voltage = Much brighter & also rechargeable
- Using single AAA battery, Min 1 - max 125 lumens,
10440 Li-ion battery, Min 1 - max 285 lumens.
- Size: 89mm length (including the switch button) diameter: 15mm
- Weight: 38 grams
- Titanium Grade 5 Billet
- 4 modes of brightness & fully programable to with the instructions below
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Warning: Don't use this cell in any another AAA or Maratac flashlight that you
own as it will void your warranty, and destroy the light.
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH. You MUST read the safety warnings and resources before purchasing, using, and/or handling batteries.
This light is a really good light. The machining, light output for the size. The only thing I would suggest is a red light and strobe. I don’t know how that could be incorporated but it definitely would take it to the next level.
the perfect size for edc! the pocket clip is robust and the overall size of the light issued for just dropping in my pocket or utilizing the clip. the pineapple/grenade surface comfortable and provides outstanding grip retention ,plus its just fun to roll around in the hand for anxious fingers.
This is a grcat little light and slips easily into a pocket. I personally like titanium and the slightly warm Nichia emittter.
This one has the best features of everything rolled into 1.
Convenient size for pocket carry
Decent pocket clip
Nice and bright.
Rechargeable high voltage battery
Use of regular AAA battery if push comes to shove.
Took a bit to get the programming done. Very well made. Another excellent product.