Limit 2 Per Customer!
High performance Nichia 219B 4500K R9080 high CRI LED
285 Lumens Max!
Gen 2 Upgraded Integrated Clip + Glow O-ring
Out First Programmable Push Button Flashlight
Includes 10440 Battery + ( Pro Intelligent Charger included ) ( Order An Extra Here )
We have received hundreds of emails asking for a light that uses a 10440 cell battery. We now have the Titanium ReyLight AAA/10440 light which works with both cell variants.
Why use a 10440 Lithium cell? Higher voltage = Much brighter & also rechargeable
- Using single AAA battery, Min 1 - max 125 lumens,
10440 Li-ion battery, Min 1 - max 285 lumens.
- Size: 89mm length (including the switch button) diameter: 15mm
- Weight: 38 grams
- Titanium Grade 5 Billet
- 4 modes of brightness & fully programable to with the instructions below
1. Turn on the light.
2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.
a. 1 blink: mode group selection. Press the button to enter this menu.
i. 1 blink: (ML)-2%-20%-100%
ii. 2nd blink: (ML)-10%-40%-100%
iii. 3rd blink: (ML)-2%-10%-50%
iv. 4th blink: (ML)-50%-100%-strobe-SOS
It then repeats. Press the button during any blink to select that mode group.
b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.
c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.
d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.
e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.
Warning: Don't use this cell in any another AAA or Maratac flashlight that you
own as it will void your warranty, and destroy the light.
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH. You MUST read the safety warnings and resources before purchasing, using, and/or handling batteries.
I have every version of this light, but this is by far my favorite finish rugged, while still looking refibed. The programability is a major selling point as is the flexibility run aaa if needed. The only potential downside for this model: the button protrudes from the end. Tail standing is doable, but not the most stable. Not a factor for me. Last “gripe”: the clip is the standard shiny finish. I lightly touched it up with some 250grit sand paper and it matches the finish well.
I LOVE this light.
It's certainly bright enough for my needs as an EDC light. I also appreciate being able to use a AAA for power in a pinch. The moon light mode is perfect for when I'm out photographing the milky way.
Programming is a little challenging, but I really appreciate the flexibility it offers. I like running program 2 (ML-10%-40%-10%), memory off, moonlight on, in LMH order. This lets me start low to maintain night vision and escalate to brighter modes, if needed.
I liked this Reylight from CountyComm enough I purchased their quad-emitter Dawn and am waiting for the full-sized pineapple to come beck in stock.
What a great little edc light . I chose the stonewashed which matches pretty close to my Umnumzaan. If you are thinking of getting one do it!
Handy, light weight, and bright.
Its a great lighter for your live.